25
Basic Operation
“Set Audible Message Alert ”
When Message Alert is turned on, the base beeps
Off
*
once every 10 seconds when new messages
On
have been received.
“
Set Announce Only
”
When you turn
Announce Only On
, callers hear
Off
*
your announcement, but cannot leave a message.
On
“
Set Base Ringer
”
Turn the Base ringer on or off.
On
*
Off
“
Set Number of Rings
”
Choose how many times the phone will ring
2
before the system answers a call.
4
*
With Toll Saver active, the system answers after two
6
rings when you have new messages and after
Toll Saver
four rings when you have no new messages.
NOTES:
1: To advance the remote access code by increments of 10, press and hold
CHANGE
.
2: You can exit Feature Setup at any time by pressing a
MAILBOX
button.
Setting Up Your Answering System
You can set up one feature at a time, or you can set up a feature and then move
on to set up another feature.
1. Make sure the answering system is
ON
.
2. Press
MENU
until the system announces the feature you want to set.
Refer to the
Feature Summary
below for a description of the features and
your choices.
3. Press
CHANGE
until the system announces the desired setting.
4.
Press
TIME/SET
to confirm your selection.
5. Press
MENU
to move on to the next feature, or press a
MAILBOX
button to
exit Feature Setup.
Feature Summary
Default settings indicated by
*
.
System announces: Description/directions:
“
Set Security Code
”
Use
CHANGE
to choose the remote access code
you will use to access features and functions of the
answering system from a touch tone phone. You can
select any two digit code, from 40 to 99.
System announces: Description/directions:
Answering System Operation
50
*
91-005650-040-000t2455.p65
7/21/2004, 3:52 PM
25