Virax 262070, Руководство пользователя

Страница: 13 / 76

13
EN
▪
DO NOT USE THE TOOL IF THE SWITCH CANNOT GO FROM ON TO OFF AND VICE VERSA. Any tool
which cannot be controlled by the switch is dangerous and must be repaired.
▪
DISCONNECT THE PLUG FROM THE CURRENT SOURCE BEFORE ANY ADJUSTMENT OR ACCESSORY
CHANGE OR BEFORE PUTTING THE TOOL AWAY. These preventive safety measures reduce the risk of the
tool starting accidentally.
▪
KEEP THE TOOLS IN SAFE, DRY AND CLOSED LOCATIONS, OUT OF CHILDREN'S REACH. DO NOT
ALLOW PEOPLE WHO ARE UNFAMILIAR WITH THE TOOL OR THESE INSTRUCTIONS TO OPERATE IT.
The tools are dangerous in the hands of novice users.
▪
OBSERVE TOOL MAINTENANCE. CHECK THAT THERE IS NO INCORRECT ALIGNMENT, LOCKING OF
MOVING PARTS OR BROKEN PARTS BEFORE USE. Numerous accidents are due to poorly maintained tools.
Any damaged or defective protection, switches or other parts must be repaired or replaced by a qualified
technician.
▪
USE THE TOOL AND ACCESSORIES ACCORDING TO THESE INSTRUCTIONS, TAKING ACCOUNT OF
THE WORKING CONDITIONS AND THE WORK TO BE CARRIED OUT. Using the tool for operations other
than those specified may lead to dangerous situations. Always respect the machine's capacities, taking account
of the working conditions and the tasks to be performed. Using the machine other than for the planned usage is
dangerous and invalidates all warranties.
▪
TAKE ACCOUNT OF THE WORKING ENVIRONMENT. Do not expose electrical tools to rain or store them in
damp or wet locations.
▪
ONLY USE ACCESSORIES RECOMMENDED BY VIRAX FOR YOUR MODEL. Failure to respect this
instruction may present a danger for the user and invalidate the warranty.
▪
NEVER TRY TO ADJUST OR CHANGE THE ACCESSORIES WITHOUT DISCONNECTING THE TOOL.
3.5. Maintaining the tool
▪
MAINTAIN YOUR TOOL CAREFULLY. Keep your tools clean for correct operation.
▪
THE HANDLE MUST BE CLEAN AND FREE OF OIL. Keep the tools clean for safe handling.
▪
HAVE THE TOOL MAINTAINED BY AN APPROVED REPAIR COMPANY USING ORIGINAL SPARE PARTS.
Failure to respect this instruction may present a danger for the user and invalidate the warranty.
4- Specific safety instructions
Read carefully and follow these instructions every time the electric pressure test pump is switched on:
1. Be sure that the mains power supply is protected with a residual current device (RCD).
2. Always disconnect the electric pressure test pump from the mains after each test and before carrying out any
of the following operations:
a. Moving the electric pressure test pump from one place to another,
b. All maintenance operations,
c. All accessory fitting operations.
3. Do not pull on the electric cable, the supply hose or the high pressure hose to move the electric pressure test
pump.
4. The water jet nozzles maybe dangerous if used improperly: never direct the jet towards people, animals, high
pressure equipment or the electric pressure test pump itself.
5. Do not direct the jet towards yourself or other persons to clean clothing or footwear.
6. WARNING: the hoses, accessories and connectors are very important for the safety of the electric test pump.
Use only hoses, accessories and connectors as recommended by the manufacturer.
7. If you use an extension cable, all plugs and connectors must be waterproof.