4-1
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
4.
Configuring Your Transparent Bridge
1.
All IP addresses and PVC values stated in this manual serve
only as examples for your better understanding. You are
required to replace these values with those given by your
ADSL Service Provider / System Administrator.
2.
Console commands are case-sensitive. Punctuations (examples,
'_' underscore, '-' hyphen, ' ' spacing, etc) must be adhered to
strictly.
3.
For any queries on the console commands, you may refer to
Appendix A - Commonly Used Commands
for the syntax and
descriptions.
4.1
Network Setup Overview
PC with Ethernet Card
Bridge
PVC=0/35
ADSL
Your Router
4.2
Configuring the Basics
Please carry out the following necessary steps to configure your router. Details of each
step can be found on the following pages.
Step 1: Resetting your Router's Configuration
Step 2: Configuring the LAN
Step 3: Saving the Configurations
