VIRATA ADSL Ethernet Router Series, Техническое руководство

Страница: 16 / 84

○ ○ ○ ○ ○
2 — Basic Commands on Running Local Management
2-3
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For commands in section 2.5 , changes will take effect only after
you have re-established the line by issuing a
bsp down
and
bsp up
commands (see section 2.4 ).
For changes to be permanent, please follow by a
config save
command.
2.4 To Disconnect/Connect the ADSL Link
i) To disconnect the ADSL link:
bsp down
(Upon issuing this command, ADSL Link will be disconnected unless the
following command is issued.)
ii) To re-connect (establish) the ADSL link:
bsp up
2.5 To Toggle between Various Modes
i) To set router to multimode (auto-detect G.dmt, G.Lite & ANSI TI.413):
bsp multi
ii) To force router into detecting G.Lite only :
bsp glite
iii) To force router into detecting G.dmt only :
bsp gdmt
iv) To force router into detecting ANSI T1.413 only :
bsp ansi