○
○
○
○
○
3 — Configuring Your Router
3-4
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
3.3
Configuring the Basics
Please carry out the following necessary steps to configure your router. Details of
each step can be found on the following pages.
Step 1: Resetting your Router's Configuration
Step 2: Configuring the LAN
Step 3: Configuring the WAN
Step 4: Configuring the Routing Table
Step 5: Enabling IP Forwarding
Step 6: Enabling NAT
Step 7: Saving the Configurations
With the basics configured, you may proceed also with the configurations on the
following sections.
3.4
Setting Up NAT Inbound Port Forwarding
3.5
Configuring DHCP Server
3.6
Configuring DNS Relay
3.7
Configuring SNMP
3.8
Setting Up Telnet Access
3.9
Configuring Autoloop for IP Interface
At the prompt for password, enter either 'stm' or 'password'
(without the quotes). These are factory default passwords.
(If you have changed the default password at the DSL Router
Commander - SNMP option, enter your new password.)
