6. 4-20mA output (optional):
For those looking for the capability to transmit the UV
intensity data to a remote location via a 4-20 mA signal, an optional“Y”cable is
available from your dealer (Figure 5A). Please order PN 260134. This“Y”cable
comes with 20 meters (65‘) of cable for the 4-20 mA signal. To install, first remove
the existing sensor cable from the HF Enclosure (Figure 5B) and affix the new “Y”
cable (Figure 5C). Next, attach the “male” end of the existing sensor cable to the
“female” end of the new “Y” cable. Appropriately attach the 4-20 mA cable to the
applicable equipment and ensure all connections are hand-tight.
FIGURE 5A
FIGURE 5B
FIGURE 5C
14
