Installation
9
1
•
Ensure the controller is
plugged in for entire cleaning
process.
2
•
Shut off the water supply.
•
Close each faucet.
3
•
Press the pressure button to
release the pressure from the
cartridges
4
•
Remove the drain plug at the
bottom of the sump and place
a pail to catch the water.
•
Reinstall the drain plug.
5
1
1
2
2
•
Remove the sump housings
using sump wrench.
6
Household 5.25%
Bleach Solution
BLEACH
x2
x2
1
2
•
Remove cartridges and pour
2 cups of household bleach
solution into the sump
housings.
Note:
DO NOT use Hydrogen
Peroxide.
7
1
1
2
2
•
Reinstall the housings.
8
0
30
15
45
30 mins
•
Open all faucets and turn on
the cold water supply
followed by hot water (if
available) until you smell the
bleach.
•
Close all faucets and allow
bleach in the water lines for
30 minutes.
9
1
1
2
2
•
Shut off the water supply.
•
Remove both housings.
10
10
1
1
2
2
•
Reinstall both the cartridges
and housings.
11
11
•
Flush all water outlets until
bleach can no longer be
smelled (at least 5 minutes).
•
Press the pressure button to
purge air to complete the
cleaning procedure.
•
Inspect for any leaks.
