26
© 2015 Directed. All rights reserved.
Basic Remote Functions
5-Button Remote Control
Button
Level
Direct Access
x 1
x 2
x 3
x 4
Lock
Silent Mode Lock
Unlock
Silent Mode Unlock
Remote Valet
Car Finder
Remote Start
Runtime Reset
Timer Mode
Smart Start
Rear Defogger
Trunk Release
AUX 1
AUX 2
AUX 3
AUX 4
Function Shift
Cabin Temperature
Request (2-Way only)
Runtime Check
(2-Way only)
Note:
See
Owner’s Guide
of your specific model for exact functionality. The above table reflects the LCD
model but is also applicable to the LED and Companion remote controls (however, some f button functions
may differ).
Important:
If the Control Center) has been replaced, all remote controls must be re-paired with the system.
See
Remote Pairing
for details.
Reset and Deletion
If a feature/Virtual Tach needs to be reset or the remote controls need to be deleted, use the following
procedure.
1.
Turn
the ignition to the ON position (The heavy gauge pink wire must be connected).
2. Within 10 seconds,
press
and
release
the Control Center button 2 times if you want to delete remote
controls, 3 times to reset features or 4 times to reset Virtual Tach.. These function steps are described
next.
•
Step 2:
Delete remotes: This feature erases all remote controls from the memory of the keyless entry
system. This is useful in cases when a customer’s remote is lost or stolen.
Note:
This does not reset the programmed features of the keyless entry system or reset the Virtual Tach
setting.
•
Step 3:
Reset Features: This resets all features of the keyless entry system to the factory default settings.
Note:
This feature does not delete the remote controls from the keyless entry system or reset the Virtual
Tach setting
•
Step 4:
Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on the next
remote start sequence the unit begins Virtual Tach initialization.
Note:
The “Zap” feature on the Bitwriter does not reset the Virtual Tach setting.
3. Once you have selected the function step,
press
the Control Center button once more and
hold
it. The
LED flashes and the horn honks to confirm the selected functional step.
Do not release
the Control
Center button.
4. While holding the Control Center button,
press
the button on a programmed remote control. The
unit honks to confirm that the remote controls have successfully been deleted or the features have been
reset.
5. Once the feature is reset, the Control Center button can be released.
Содержание 4811V
Страница 1: ...O W N E R S G U I D E M O D E L NO ONE DARES COME CLOSE 4811V 4816V...
Страница 55: ...L...