
25
© 2015 Directed. All rights reserved.
Vehicle Setup for Pairing:
•
Turn
ON the vehicles ignition to the RUN position.
• Within 5 seconds
press
and
release
the Control Center button on the Control Center one time then
press
it once more and
hold
it.
• The Control Center LED will begins flashing in a single flash pattern and the horn (if connected) will
sound once to confirm the system is in pairing mode. You may now
release
the Control Center button.
3. With both the remote and system in pairing mode,
press
the button on the remote. The siren chirps
to indicate the system has learned the remote ID and is sending its ID to the 2-way remote (the 2-way
remote will emit several tones to indicate the remote has learned the system ID, the 1-way remote does
not offer confirmations).
4. If pairing fails,
press
the button on the remote again to attempt another pairing.
5. Once the pairing is completed
turn
OFF the ignition in the vehicle, the horn (if connected) will sound to
confirm exiting. When both the system and remote have exited the Pairing mode, test for functionality.
To exit Pairing Mode on the remote:
• Wait 30 seconds without pressing a button on the remote.
•
Press
and
release
the button on the remote.
To exit Pairing Mode on the system:
•
Turn
OFF the ignition.
• Wait 60 seconds for the system to automatically exit.
• The horn (if connected) will sound to confirm exiting.
1 Button 2-way or 1-way Remote Control:
1.
Press
the button on the remote control twice and then
hold
on the third press. The transmit LED will
come on solid, continue to
hold
the button until the transmit LED changes its pattern.
Release
the
button and the transmit LED will begin flashing as an indication that the remote has entered the pairing
mode.
Vehicle Setup for Pairing:
•
Turn
ON the vehicles ignition to the RUN position.
• Within 5 seconds
press
and
release
the Control Center button on the Control Center one time then
press
it once more and
hold
it.
• The Control Center LED will begins flashing in a single flash pattern and the horn (if connected) will
sound once to confirm the system is in pairing mode.
• You may now
release
the Control Center Button.
2. With both the remote and system in pairing mode,
press
and
hold
the button on the remote. The horn
sounds to indicate the system has learned the remote ID and is sending its ID to the 2-way remote (the
2-way remote will emit several tones to indicate the remote has learned the system ID, the 1-way remote
does not offer confirmations)
3. If pairing fails,
press
the button on the remote again to attempt another pairing.
4. Once the pairing is completed
turn
OFF the ignition in the vehicle, the horn (if connected) will sound to
confirm exiting. When both the system and remote have exited the Pairing mode, test for functionality.
To exit Pairing Mode on the remote:
• Wait 30 seconds without pressing a button on the remote.
To exit Pairing Mode on the system:
•
Turn
OFF the ignition.
• The horn (if connected) will sound to confirm exiting.
Содержание 4811V
Страница 1: ...O W N E R S G U I D E M O D E L NO ONE DARES COME CLOSE 4811V 4816V...
Страница 55: ...L...