Viper 4811V, Руководство пользователя, Страница: 25 / 57

© 2016 Directed. All rights Reserved. 2
QRN4816 2016-047
Programming System Features
The System Features Learn Routine dictates how the unit operates. It is possible to
access and change most of the feature settings using the Control button.
1. Turn the ignition on, then off.
2. Select a Menu. Press and hold the Control button. The number of horn honks
and LED flashes indicates the menu number. One horn honk and LED flash
indicates menu 1, two horn honks and LED flashes - menu 2 and three horn
honks and LED flashes for menu 3.
3. When the desired menu horn honks are heard with LED flashes, release the
Control button.
4. Select a Feature. Press and release the Control button the number of times
corresponding to the feature you wish to change. Then press and hold one
more time to select the features.
5. Program the Feature. While holding the Control button, you can change the
feature by pressing the button on the remote control, each press will cycle
through each option.
Once a feature is programmed:
• Other features can be programmed within the same menu
• Another menu can be selected
• The learn routine can be exited if programming is complete
To access another feature in the same menu:
1. Press and release the Control button the number of times necessary to advance
from the feature you just programmed to the next one you want to program.
2. Then press the Control button once more and hold it.
To select another menu:
1. Press and hold the Control button.
2. After 3 seconds, the unit advances to the next menu and the horn honks and
the LED flashes, indicating which menu has been accessed.
The learn routine exits if any of the following occurs:
• The ignition is turned On
• There is no activity for 30 seconds
• The Control button is pressed too many times
Bitwriter - only Options
If programming with the Bitwriter®, the learn routine can be locked or un-
locked. If the learn routine has previously been locked, it must be unlocked
with Bitwriter® - this cannot be done manually with the Control button.
The Bitwriter® gives you access to a wider range of system options. These
features and the adjustments that may be programmed are described in the table
below. Default settings are in
bold .
Menu
Item
Feature Default Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 Aux/Trunk Icon Type* Trunk Window Sunroof Audio Lights/Left dr/Right
dr/Rear Hatch
2 Aux 1 Timed Output 30 sec. Options: 1 to 90 sec.
3 Aux 1 Icon Type* Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
4 Aux 2 Timed Output 30 sec. Options: 1 to 90 sec.
5 Aux 2 Icon Type* Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
6 Aux 3 Timed Output 30 sec. Options: 1 to 90 sec.
7 Aux 3 Icon Type * Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
8 Aux 4 Timed Output 30 sec. Options: 1 to 90 sec.
9 Remote Start Runtime 12 min. Options: 1 to 60 min.
Menu
Item
Feature Default Opt. 2 Opt. 3 Opt.4 Opt. 5+
10 Timer Mode Runtime
(minutes) ** 12 min. Options: 1 to 16 min.
11 Timer Mode Starts** 6 starts Options: 1/2/3/4 to 24 (Starts) in increments of 2
12 Timer mode intervals
(hours)**
3 hr. Options: 1/2/ 3 /4 to 24 in 2 hour increments
13 Smart start low
temp**
0° (F)
Options: OFF, -20° to 70° in 10° increments
14 Smart start high
temp**
100° (F)
Options: OFF, 40° to 130° in 10° increments
15 Smart start low bat-
tery (volts)** 10.5V Options: OFF, 9V to 12.5V in 0.5V increments
16 Diesel Start Delay
type (seconds) 15 sec. Options: 1 to 90 sec.
17
Starter Release
Fine Tune
6
(normal) Options: 0 to 20 in increments of 1
18 Virtual Tach Fine Tune Not
Initial-
ized Options: Not initialized, 0 to 1000 in 50 millisecond
increments
19 Feature Programming Unlocked Locked
20 Transmitter Program-
ming Unlocked Locked
* Feature only available on 2-way LCD system.
** Not applicable to 1-way or 1 button remote controls.
Feature Menus
Default settings are in bold type.
Menu 1 - Vehicle Integration
Menu
Item
Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 System Locking Mode Active
Locking Passive
Locking Auto Re-
locking
2 Panic Mode * On Ign Off
only Off
3 Horn Function Confirma-
tion Chirp
(20 ms) &
Panic Confirma-
tion Chirp
(30 ms) &
Panic Confirma-
tion Chirp
(40 ms) &
Panic Confirma-
tion Chirp
(50 ms) &
Panic Confir-
mation
Chirp Off
- Panic
Only *
(Pulsed)
4 Ign-controlled locks No Ign-
locking Lock &
Unlock Lock Only Unlock
Only
5 Door Lock Pulses Single Double
Unlock
Only Double
Lock Only Double
Lock &
Unlock
6 Door Lock output
duration 0.8 sec. 3.5 sec. 0.4 sec.
7 2nd Unlock 2nd unlock
on/ Ign-
control after
first unlock 2nd unlock
on/ Ign-
control with
first unlock
8 Comfort Closure * No Comfort
Closure Comfort
Closure 1 Comfort
Closure 2
9 Hood Trigger Type Normally
Open
Normally
closed
10 Door Switch Type Normally
open Normally
closed
11 Ignition Off msg *
(remote button unlock) On Off
* Not applicable to 1-way or 1 button remote controls.
.
Menu 2 - Convenience
Menu
Item
Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 One-time Bypass No Bypass Bypass
2 Valet Switch Pulse
Count 1 2 3 4 5
3 Door Ajar Error msg * On Off
4 Ign-controlled Dome
light On Off
5 OEM Alarm Disarm
w/Aux/trunk* On Off
6 OEM Alarm Disarm
Output With
Unlock Before
Unlock Remote
Start Only
7 OEM Alarm Disarm
Pulses 1 2
8 Aux 1 Output type ** Validity Latch Latch/
reset/ign Timed Off (5)/2nd
Unlock (6)
9 Aux 1 Linking No Link-
ing Link to
Lock* Link to
Unlock Link to
Lock/
Unlock* Link to
Remote Start
only
10 Aux 2 Output type ** Validity Latch Latch
reset/ign Timed Off (5)/2nd
unlock (6)
11 Aux 2 Linking No Link-
ing Link to
Lock* Link to
Unlock Link to
Lock/
Unlock* Link to
Remote Start
only
12 Aux 3 Output type** Validity Latch Latch
reset/ign Timed Off (5)/2nd
unlock (6)
13 Aux 3 Linking No Link-
ing Link to
Lock* Link to
Unlock Link to
Lock/
Unlock* Smart Key
Control (Link
to Remote
Start Off)
14 Aux 4 Output Type** Validity Latch Latch
reset/ign Timed Off (5)/2nd
Unlock (6)
15 Aux 4 Linking No linking Link to
Lock* Link to
Unlock Link to
Lock/
Unlock* Link to
Remote Start
Only
16 Aux/Trunk Output type Validity Off 2nd unlock
* Not applicable to 1-way or 1 button remote controls.
** Aux channels with the 1 button remote can only be accessed with channel
linking to unlock or remote start or with the optional SmartStart module.
Menu 3 - Remote start
Menu
Item
Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 Transmission Mode Manual Automatic
2 Engine Checking Mode Virtual
Tach Voltage Off Tachom-
eter
3 Cranking Time 0.6 sec. 0.8 sec. 1.0 sec. 1.2 sec. 1.4 (5) /1.6
(6)/ 1.8 (7)/
2.0 (8)/
4.0(9)
4 Remote Start Runtime 12 min. 24 min. 60 min.
5 Activation Pulse Count 1 2
6 Turbo Mode * No Turbo
Mode On-1 min. On-3 min. On-5 min. On-10 min.
7 Timer Mode Runtime** 12 min. 3 min. 6 min. 9 min.
8 Flex Relay Function Ignition 2 Acces-
sory 2 Starter 2
9 Diesel Start Delay Wait-to
Start
input Timed 15
sec. Timed 30
sec. Timed 45
sec.
10 Accessory during Diesel
Start Delay On Off
11 Status 2 Output Status Latch Rear
Defogger Pulse Rear
Defogger
12 Parking Light Output Constant Pulsed Off
Menu
Item
Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+
13 Anti-grind Output On Off
14 Tach Mode Starter
Release Normal Increase Decrease
15 Vehicle temp
auto report** Off On
16 Remote Start Safelock Off On
* With the 1 button remote; turbo timer mode can only be activated by adding
a push button to the white/blue (-) activation input wire on the 24 pin har-
ness.
** Not applicable to 1-way or 1 button remote controls.
Reset and Deletion
To reset the features/virtual tach or delete remote controls follow this procedure:
1. Turn the key to the ON position.
2. Within 10 seconds press and release the control button: two times to delete
remote controls, three times to reset the features to default or four times to reset
virtual tach.
3. Once you have selected the function step, press the control button once more
and hold it. The LED will flash and the horn honks to confirm the functional step
chosen. Release the control button.
4. Press the button on a programmed remote control. The horn honks confirming
the feature has been reset/deleted.
5. Turn the ignition off or wait 60 seconds to exit the reset/delete procedure, the
horn emits two sounds to confirm.
Note : Deleting a remote control does not reset the features or virtual tach, resetting
the features does not delete remote controls or reset virtual tach. The Zap feature on
the Bitwriter will not reset the virtual tach setting.
Reset/delete will exit if:
• The ignition is turned off.
• 60 seconds lapses with no actions.
• The control button is pressed too many times.
Remote Functions
System State Press/Release Press/Hold for 3 sec.
ENGINE OFF START ENGINE CAR FINDER
ENGINE ON UNLOCK DOORS STOP ENGINE
See owner’s guide for more information.
More detailed information about
this system can be found online at:
www.directechs.com