background image

• If a door is opened, the system will immediately start chirping the siren

and flashing the parking lights. Three seconds later, the siren output chan-
ges to a continuous blast. This progressive reponse gives you time to
disarm the system with your transmitter if you inadvertently open the
door while the system is armed, while still providing instant response
(even if the door is immediately closed).

• Turning on the ighition key will trip the same two-stage reponse as opening

a door.

Armed While Driving
Your system can be armed while driving the vehicle! Simply press

Button I on your transmitter while the vehicle is running. The system will
chirp once and then once more to indicate that the ignition is on. The
system will not respond to any input except the door triggers and the
starter kill relay (if installed) will not be activated. Once you have reached
your destination, the system must be disarmed by pressing Button I on
the transmitter once more. The siren will chirp twice and the LED will stop
flashing. If you do not disarm the system, it will trigger when the any door
is opened to exit the vehicle.

Disarming
To turn off, or disarm the system, press Button I again. You will hear

two chirps, and te parking lights will flash twice. If power locks are
controlled by the system, the doors will unlock. If the siren chirps either
four or five times when disarming, see Diagnostics section.This is called
Tamper Alert.

High Security Disarm
Your system includes a High Security Disarm feature. During the

triggered sequence, using the transmitter to disarm it will only stop the
triggered sequence (the siren will stop and the parking lights will stop
flashing). However, the system will remain armed and the doors will stay
locked. This is extremely useful if you must stop the system from sounding,
but are unable to check the vehicule visually. The trigger will stop, but the
vehicle will remain protected.

To disarm with the transmitter during a trigger, press Button I on your

trasmitter. The siren will stop sounding. Next press Button I once more
and the system will chirp four or five times (reporting the trigger) and
disarm.

-6-

Содержание 260 HF















Отзывы: