background image

Disarming Without a Transmitter
This feature allows you to disarm the system without the transmitter

should it be lost, damaged or disabled. In order to disarm without a
transmitter, you must have the vehicle’s ignition key and know where the
Valet button is. Be sure to check with the installer for the location of the
Valet button.

Silent Mode

TM

To temporarily turn off the arm of disarm chirps, use Silent Mode

TM

.

Simply press Button II briefly before arming or disarming, and the confir-
mation chirp(s) will be eliminated for that one operation only. If you want
the arm/disarm chirps turned off permanently, your dealer can do this for
you.

NOTE: The Warn  Away

®

 response to lighter impact is bypassed if

the system is armed using Silent Mode. This ensures that no chirps
will be emittted by the siren in an area you want chirp-free. The
system is still fully able to trigger. Only the Warn Away response
is defeated.

Panic Mode
If you are threatened in or near your vehicle, you can attract attention

by triggering the system with you transmitter! Just press Button I for 1.5
seconds, and you will enter Panic Mode. The siren will sound and the
parking lights will flash for 30 seconds. To stop Panic Mode at any time,
press Button I on the transmitter again.

Turn on the ignition. Push the Valet switch
within 15 seconds. The system should now
disarm. If it does not, you may have waited
too long, so turn the ignition off and on
and try again.

-7-

Содержание 260 HF















Отзывы: