Viper 260 HF Скачать руководство пользователя страница 14

Security & Convenience Expansions

Here we have listed only some of the many expansion options available for
use with your system. Please consult your dealer for a complete list of all
the options available to you.

Field Disturbance Sensor: An invisible dome of coverage is established
by the 508D “radar” sensor. Your system can react to any intrusions into
this field with the triggered sequence.

Backup Battery: The 520T keeps the system armed, triggers the alarm
and keeps the starter kill active if main battery power is disconnected.

Electronic Hood Lock: This prevents the vehicle’s hood from being
opened whenever the system is in alarm mode, keeping thieves away from
the system’s siren, the battery connections, or other components under the
hood.

Audio Sensor: Metal on glass, glass cracking, or breaking glass produce
distinctive acoustic signatures. The 506T audio sensor uses a microphone
to pick up sounds, and then analyze them with proprietary acoustic soft-
ware to determine if the glass has been struck.

Power Trunk  Release: The auxiliary output of the system can be used to
operate a factory power release for the vehicle’s trunk or hatch. (An op-
tional relay may be required.) If the factory release is not power-activated,
DEI's 522T trunk-release solenoid can often be added.

Power Locks: This system offers lock outputs that can control some manu-
facturers' power door lock systems. For other systems, additional parts may
be required.

Valet® Start System: For the ultimate in convenience, the Valet Start Sys-
tem can start your vehicle, monitor engine functions, and power your cli-
mate control system with a push of a button! Over-rev protection, open-
hood lockout, brake-pedal shutdown, and automatic timer shutdown are all
included. (Only for automatic-transmission, fuel-injected gasoline vehicles).

Power Window Control: Automatic power window control is provided with
the 529T or 530T systems. These can operate power windows, roll them up

-14-

automatically when the system is armed, and roll them down when the
auxiliary output button is pressed. The 530T also provides one touch switch
operation.

Содержание 260 HF















Отзывы: