6
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table.
Monitor
Stand Base
Foam
Stand Stem
2. Take out the two main parts of the stand, the pad and the cable clip from the package.
Next, use the included screwdriver and two NO.1 screws (14mm) to fasten the cable clip
and base to the stem. Install the pad at the bottom of the base.
Stand Base
Pad
Stand Stem
Cable Clip
NO.1 Screws (14mm) x 2
3. Remove the foam covering on back of mornitor, and use NO.1 screws (8mm) x 2 to fasten
the stem onto monitor, then cover the decorative covers on it to complete installation.
NO.1 Screws
(8mm) x 2
Decorative Cover x 2
To avoid damage, do not touch the screen when moving the monitor.
Содержание GFT27DB
Страница 19: ......
Страница 20: ...COPYRIGHT 2018 VIOTEK ALL RIGHTS RESERVED...