7
FHR-35
Pan and Tilt Head
Robotic
FHR-35 Robotic Pan and Tilt Head
Installation
Mounting the Pan Bar Assembly (FH-145)
HD Tripod Mounting Options
The FH-145/FHR-145 pan and tilt head can be mounted onto the
following heavy-duty (HD) tripods:
Ÿ
Vinten HDT-1 single-stage tripod
Ÿ
Vinten HDT-2 two-stage tripod
Ÿ
Sachtler OB2000 aluminium tripod
Mount the head to the HD tripod using either a Mitchell Centre Screw
(spider adaptor) and key or a Vinten Quickfix® adaptor.
WARNING!
Engage the tilt lock before lifting or working on
the head.
For manual operation, mount the pan bar assembly to the camera
cradle. Offset pan bars increase the range of movement and improve
manoeuverability of large and unwieldy payloads. The pan bar
assembly can be mounted on the left- or right-hand side of the
camera cradle.
1.
Fit the pan bar assembly
to the cradle. Insert rods
into openings ensuring
they cross at least two
mounting points.
2.
Tighten the screws
underneath the openings
to secure the assembly.
3.
Attach the pan bars to
the rosette mountings.
CAUTION!
Do not attempt to manually switch the pan or tilt
control switch to AUTO. Robotic mode must be initiated from
the control panel.
Содержание FH-145
