11
FHR-35
Pan and Tilt Head
Robotic
FHR-35 Robotic Pan and Tilt Head
Installation
Adjusting the Horizon Level
Mounting the Camera
1.
2.
Apply the tilt lock. Using a 5 mm
Allen key, remove the three centre
screws securing the camera
cradle and set the camera cradle
to its lowest position.
Secure the cradle in position.
Adjust the jacking screw as
required to level the horizon.
3.
Carefully position the camera
onto the cradle. Align the
mounting holes in the bottom
of the camera with one of the
slots on the cradle. Fit the
camera screws and tighten to
secure the camera in position.
Using a 5 mm Allen key, tighten the jacking screw underneath the
mounting plate to adjust the horizon level of the payload. Loosen the
jacking screw before adjusting the height of the mounting plate.
Содержание FH-145
