FHR-35
Pan and Tilt Head
Robotic
3
FHR-35 Robotic Pan and Tilt Head
Safety and Warnings
Warning Signs
Warning signs should be displayed prominently in the workplace
alerting personnel that robotic equipment is in use and may move
suddenly and without warning.
If personnel are working on robotic or associated equipment, ensure
a warning sign is placed at the controller (control panel) to alert
operators that work is being carried out.
Safety Notes for Operators
Operators must familiarise themselves with the working footprint of
the robotic head, including all associated equipment (lens, zoom and
focus controls, viewfinder, prompter, etc.) to prevent inadvertent
collisions or injury to personnel.
If personnel are too close to a head or pedestal that is about to
move, the operator should prevent the motion from starting or stop
the motion if it has started.
We strongly recommend that the operator verifies visually that the
active area is clear of hazards and personnel, both before and during
remote operation.
Intended Use
This product is designed for use within television studios to support
and balance a camera together with ancillary equipment weighing up
to 65 kg (145 lb). Camera operators can remotely control the head
pan and tilt axes, and the lens zoom and focus using Vinten control
systems.
Safe Working Environment
In normal operation, remote-controlled equipment can move
suddenly and without warning. Since audible warnings are not
suitable for use within the studio environment, it is recommended
that only trained personnel be allowed to work in the active areas,
where remote-controlled heads and pedestals are located.
Personnel must be made aware of the potential hazards of working
in a robotic environment. To avoid personal injury, personnel should
always exercise caution when working in the vicinity of robotic
equipment. The forces are sufficient to cause personal injury or injury
to others, and therefore caution is essential.
Safe Operating Zone
The safe operating zone for personnel is a minimum of 1 m (3 ft)
outside of the footprint of the pan and tilt head.
In most installations, the teleprompter (if installed) is mounted onto
the head and protrudes the furthest beyond the base of the head.
The footprint must take into account the overhang of the
teleprompter or other payload equipment as the head moves about
the pan axis.
CAUTION!
Risk of damage to equipment.
Do not lift or carry
the head by the back cover.
WARNING!
The tilt lock MUST be engaged whenever the
head is lifted or transported and before installing or adjusting
the camera or payload.
Содержание FH-145
