18
www.vintageair.com
905460 REV D 01/12/17, PG 18 OF 28
A/C & Heater Hose Installation,
V-8 Engines (Final)
1.
2.
3.
4.
5.
Using a properly lubricated O-ring, connect the #6 A/C hose to the #6 condenser hardline (See Photo 42,
below, and Figure 1, Page 9).
Using a properly lubricated O-ring, connect the #10 A/C hose to the compressor (See Photo 43, below, and
Figure 1, Page 9).
Using a properly lubricated O-ring, connect the straight fitting on the #8 A/C hose to the #8 hardline from the
condenser. Connect the 135° fitting to the compressor (See Photo 43, below, and Figure 1, Page 9).
Connect the heater hose from the heater control valve to the intake manifold. Secure with a hose clamp (See
Photo 43, below).
Connect the remaining heater hose to the water pump. Secure with a hose clamp (See Photo 43, below).
Photo 42
Photo 43
#6 Hose
#8 Hose
Heater Hose
from Manifold
Heater Hose
to Water Pump
NOTE: Vintage Air systems require (2) 5/8” hose nipples (Not Supplied).
