7
www.vintageair.com
905460 REV D 01/12/17, PG 7 OF 28
Condenser Assembly and Installation
1.
2.
Refer to separate instructions included with the condenser kit to install the condenser.
Binary switch installation (Refer to condenser instructions).
Compressor and Brackets
1.
Refer to separate instructions included with the bracket kit to install the compressor bracket.
Pulleys
1.
In most instances, the belt lengths will remain the same.
Defrost Duct Installation
1.
2.
Using (2) #6 x 3/8” pan head screws, attach 18 inches of 2” duct hose to the passenger side defrost duct.
Attach the remainder of the duct hose to the driver side defrost duct.
Install the passenger and driver side defrost ducts into the dash using (4)#6 x 3/8” sheet metal screws, (2)
screws for each duct. Direct the passenger side defrost duct away from firewall, and toward the wiper arm.
Direct the driver side duct toward the firewall, and away from wiper arm (See Photos 4-7, below).
Photo 4
Photo 6
Photo 5
Photo 7
Duct Hose
Defrost
Duct
Defrost
Duct
Wiper
Arm
Wiper
Arm
Firewall
Driver Side
Passenger Side
Firewall
