6
www.vintageair.com
905460 REV D 01/12/17, PG 6 OF 28
Engine & Passenger Compartment
Disassembly
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Disconnect battery. Ensure that the cable remains disconnected throughout the entire installation process.
NOTE: Battery is located under passenger floorboard.
Drain radiator.
Remove OEM heater hoses (discard).
Remove OEM heater/blower assembly if installed (discard) (See Photo 1, below).
Remove OEM heater wiring (discard).
Remove glove box door (retain).
Remove glove box (discard, but retain OEM screws).
Disconnect all wires and cables from OEM control panel (discard).
Disconnect all wires and cables from OEM heater control knobs (discard).
Remove OEM defrost ducts (discard).
Remove the defrost vent garnish/cover (retain) (See Photo 2, below).
Remove the round cover from the firewall (See Photo 3, below).
NOTE: Before starting the installation, check the function of the vehicle (horn, lights, etc.) for proper
operation, and study the instructions, illustrations, & diagrams.
Perform the Following:
Photo 1
Photo 2
Photo 3
Defrost Vent
Garnish/Cover
OEM Heater
Assembly
Firewall
Cover
