21
www.vintageair.com
905460 REV D 01/12/17, PG 21 OF 28
Wiring
Glove Box Installation
1.
2.
1.
2.
Plug the wiring harnesses into the ECU module on the sub case. Wire according to the wiring diagrams on
Pages 23 & 24.
Run the red and (2) white wires to the battery box in the passenger compartment. Using (2) 10-32 x 3/4”
pan head screws and (2) 10-32 nuts, mount the circuit breaker near the battery (See Photos 47, 48 & 49,
below).
Using the OEM glove box screws, install the glove box provided with the kit (See Photo 50, below).
NOTE:
Loosely install all screws before tightening.
Reinstall the glove box door (See Photo 51, below).
Photo 47
Photo 49
Photo 48
Photo 50
(2) White
Wires
Red Wire
Circuit
Breaker
Circuit
Breaker
Circuit
Breaker
Glove
Box
Photo 51
Glove Box
Door
