26
www.vintageair.com
905647 REV B 07/17/19, PG 26 OF 33
1.
2.
3.
Install the center louver duct hose adapter onto the center louver bezel using (2) s-clips as shown in Figure
1, below.
Attach (2) 25” lengths of 2 ½” duct hose to the center louver as shown in Figure 2, below.
Using (4) #8 x 3/4” countersunk screws, secure the center louver assembly to the dash as shown in Figure
3 and Photo 1, below. NOTE: Vintage Air recommends using a bead of silicone around the mating
surface of the center louver bezel before installing it into the dash (See Figure 4, below).
Center Louver Installation
Figure 4
Glove Box Installation
1.
2.
3.
Place the glove box into the glove box opening in the dash (See Figure 1, below).
Using the glove box as a template, mark and drill (6) 1/16” holes into the dash.
Secure the glove box using (6) #8 x 1/2” wide head screws (See Figure 2, below).
Figure 1
Figure 2
Figure 3
(6) #8 x 1/2”
Wide Head Screws
Center Louver Bezel
Center Louver
Hose Adapter
(2) S-Clips
Apply Silicone to Mating Surface of Bezel
Photo 1
Figure 1
Figure 2
Place Glove Box into
Glove Box Opening
Install Center Louver Assembly into Dash
Center Louver
Duct Hoses
(4) #8 x 3/4”
Countersunk
Screws
Содержание 561191
Страница 33: ......
