Vinpower ROBOTIC AUTOLOADER 3.6.0, Руководство пользователя

Страница: 45 / 64

43
Loader Utilities
3.Disc Separator
Disc Separator:
Separator Off
Disc Separator:
Single Vibration
Disc Separator:
Double Vibration
Disc Separator:
Triple Vibration
Loader Utilities
4.Z form Maneuver
Z form Maneuver
On
Z form Maneuver
Off
Loader Utilities
5.Robot Speed Mode
15.3 Disc Separator
Use this utility to tell the system the number of times the robotic arm should shake the disc it picked up from
the input spindle in order to reduce the disc sticking issue.
To enable the disc separator function:
Use the Up or Down button to select the Disc Separator menu and
press the ENT/Enter button to enter that menu.
Use the
Up or Down button to select the separator option that you
want, and press the ENT/Enter button to select it.
15.4 Z form Maneuver
Some drives have bezels that extend out from the front of the drive face. This can cause the disc to catch on
the edge of the bezel of a higher drive as it is being lowered into one of the below drives. Enabling the Z
form Maneuver will allow the robotic arm to lower the disc off center from the front of the drives to clear any
protruding obstacles like the bezels, and then center the disc directly above the extended writer tray just
before the disc is loaded.
To enable the
Z form Maneuver function:
Use the Up or Down button to select the Z form Maneuver menu and
press the ENT/Enter button to enter that menu.
Use the
Up or Down button to select whether the Z form Maneuver is
on or off, and press the ENT/Enter button to select that option.
15.5 Robot Speed Mode *(Not available on all systems)
Use the Robot Speed Mode menu option to adjust the robots movement speed for the disc loading and
unloading process. Safe Mode will provide better reliability and is recommended for overnight production.
Turbo Mode will provide faster performance, but not recommended for overnight production. Choose
between Safe Mode and Turbo Mode to suite your production needs.
To change the
Robots Speed Mode function:
Use the
Up or Down button to select the Robot Speed Mode menu
and press the ENT/Enter button to enter that menu.