- - 28 - -
12.2 Prescan
Approximately 50% of failures reported by our system are caused by errors in the
master disc which our Reader couldn’t overcome. When this kind of failure occurs, it
tends to waste all of your blank recordable media.
To help detect flaws in the master disc prior to performing the duplication process, we
introduce the “Prescan” feature. This feature will scan and detect any bad sectors
existing in the master disc. It is recommended to perform this feature before starting
the duplication task for all master discs. By doing so you can prevent wasting blank
media due to an error in the master disc.
12.3 System Info
By entering this menu, you will be able to see the hardware and software information
pertaining to your system.
12.4 Device Info
By entering this menu, you will be able to see the information for devices built inside
your system, such as the drives. That information includes but not limited to
manufacture, model number, etc.
12.5 Load Default
This function will reset all of the options back to manufacture’s default. You can
perform this function if your system is acting abnormal. You’ll need to perform
“Shutdown” and restart the system in order for this to take affect.
12.6 Update Firmware
12.6.1 Update Firmware
This function will update the software for the master tower. To update, you need to
insert the Manufacture’s Certified Update CD into the drive functioning as the Reader
and select this function by pressing the “ENT”/Enter button. We strongly suggest you
do not upgrade your system’s firmware unless your system is getting unstable.
12.6.2 Synchronize Firmware
This function will synchronize the firmware version among all towers in the chain by
applying the firmware from the master tower to all slave towers.
12.7 Save
This function will save all the settings you’ve modified since the last time the system
was booted.
13. Account Management
This menu will allow the Administrator to perform the following user administrative tasks.
This feature is disabled by default. Prior to activating this feature, the duplicator recognizes
all users as the only activated user defined as the administrator. The pre-defined
password for this menu is “0000”.
13.1 View User
This menu allows you to view current existing user accounts.