- - 19 - -
H4012M indicates the total size of your
master disc image/partition.
0/21 indicates you have a project size of
twenty-one copies and you have made zero
copies thus far.
10% indicates the current percentage of the
copying progress.
401M indicates the current amount of data
that has been copied from the master disc.
H4012M indicates the total size of your master
disc image/partition.
0 indicates you have made zero copies thus far.
10% indicates the current percentage of the
copying progress.
401M indicates the current amount of data
that has been copied from the master disc.
Step 5:
After you’ve placed all the blank discs throughout the chain, please press the
ENT/Enter button to start the job. All trays will be closed at the same time and you
will see following screen:
All rewritable media is requires to be erased prior copying. All non-erased
rewritable media will be failed. (Only exceptions are formatted DVD+RW media)
Step 6:
After 10 or 15 seconds of processing time, one of the following Copy progress
screens will appear. The left-hand screen is shown when “Specify Counter” is
selected and the right-hand screen is shown when “No Counter” is selected.
When “Specify Counter” is selected:
When “No Counter” is selected:
It is normal to see the progress indicator stay at 0% up to 1 minute. That is
caused by the initializing and finalizing stages.
Step 7:
Once the duplication run is completed, the successful copies will be ejected and you
shall see the following screen.
“OK: 7” indicates that you’ve just made 7 successful copies.
“NG: 0” indicates that you have no failure in this run.
OK: 7 NG: 0
Press ENT to Cont.
Copying... H4012M
0/21 10% 401M
Copying ... H4012M
0 10% 401M
Preparing
Please Wait
