- - 16 - -
From 1 of the 3 choices above, press the “ENT”/Enter button to submit your selection.
If you have chosen to create a new partition/image, you should see the following screen
after you submit your selection.
Please refer to the “Input Name and Number” section of “Chapter 2: Getting to know
your System” to enter the desired title. Then press the “ENT”/Enter to continue to the
next step.
If you have chosen to overwrite one of the existing partitions/images, you should see the
following screen after you submit your selection.
Then press “ENT”/Enter to continue to the next step.
If you have chosen Auto Generate, Then precede to the next step.
Step 5:
Please place your master disc into the Reader or the 1
st
Writer if there’s no Reader
installed in your system. Once the system recognizes your master disc, the loading
progress screen will be displayed, as show below:
Step 6:
Once the loading process is completed, you should see the following screen:
You can then press the “ENT”/Enter button to go back to the Hard Drive Setup
menu. And then press the “ESC”/Escape button to return to the Main menu. You
should see the following screen:
4012M indicates the total capacity of your
master disc.
FUN1 indicates the name of the partition/image
where the data is being loaded into.
10% indicates the current percentage of the
master disc that has been loaded into the hard
drive.
401M indicates the current amount data from
the master disc that has been loaded into the
hard drive.
Edit Partition Name
[ ]OK?
This Will Overwrite
[FUN1]OK?
Loading... 4012M
FUN1 10% 401M
Load Partition OK!
Press ENT to Continue
DUPLICATOR ( 3)
9.Hard Drive Setup
