V23990-P569-F2x/-F3x
fast
PHASE 0
V23990-P569-FXX-U-02-14
Tyco Electronics Raychem GmbH
Finsinger Feld 1,D-85521 Ottobrunn
Mounting
1. Insert the modul pins to
the PCB
2. Press one short side of
the modul gently as
shown on figure 1.a.
and 1.b. until two clips
of that side are locked
3. Press the other side to
lock the remaining two
clips as shown on fig
2.a. and 2.b.
4.
Module in place on
PCB fig 3.a. and 3.b
Thermal foil, recommended thickness is less than 0,08mm. Recommended material is Aluminium, covered
with phase change material
Tyco Electronics does not recommend the use of its products for other applications. Especially it is not recommended to use the
modules in life support applications where such use may directly threaten life or injure due to device failure or malfunction.
We reserve the right to make changes of the product at any time without notice, in order to supply the best possible product.
Copyright by Vincotech Revision:1
