Vimar Elvox RS16, Инструкция по установке и эксплуатации

Страница: 17 / 76

15
ACTO
4.1 - Power supply line wiring: take the cover off the board by unscrewing the screw V and connect the power supply line
1= neutral
2= earth wire
3= live
The control unit can be powered at from 120 Vac to 230 Vac 50-60 Hz
4.2 - Wiring for flashing light, gate movement warning light and accessories power supply.
Terminals Description Function
4-5 Warning light output
Output 24 V dc maximum load 120 mA, on with a steady light when moving and off when the gate is
closed, with dip-switch number 8 on used for the phototest function (4 = +24 V dc / 5 = GND)
5-6 Output for flashing light
Output 24 V dc maximum load 10 W for flashing light (5 = GND, 6 = + 24 V dc) when the gate is open
the flashing light remains on for 3 seconds if the automatic closing function is active
7-8 Accessories power supply output Output 24 V dc maximum 300 mA for supplying the photocells and accessories (7= GND / 8 = +24 V dc)
Fig. 5
Terminal number Description Input type
9
Sequential control input, for controlling
the complete travel of the gate
Normally open
10
Sequential control input, for controlling
the pedestrian travel of the gate, opens 1.5 metres
Normally open
11
Photocell input, active during closing Normally closed
12
Input for edges or internal photocell, active during
gate closing and opening
Normally closed
13 Input for stopping the gate Normally closed
14 Common inputs -
+ + + - -
14 13 12 11 10 9
PED
P.
P.
PH
C
PH
O
ST
P
CO
M
Fig. 4a
Input description table:
+ + + - -
14 13 12 11 10 9
PED
P.
P.
PH
C
PH
O
ST
P
CO
M
Fig. 6
Fig. 4b
+ + + - -
14 13 12 11 10 9
PED
P.
P.
PH
C
PH
O
ST
P
CO
M
24 Vdc 10 W
Power supply output for
accessories (max 300 mA)
+ + + - -
14 13 12 11 10 9
PED
P.
P.
PH
C
PH
O
ST
P
CO
M
230 Vac - 120 Vac
1
3
2
24 Vdc 120 mA max
gate movement
warning light
EN