Vimar ELVOX 8013406228130, Руководство по установке

Страница: 16 / 20

14
EAM2, EAM3
IT
- To re-lock the gate leaf turn the lever clockwise.
- In the event of mains power failure, the back-up battery ensures the operation of the automatic gate system for a limited period. In the event of
a flat or missing battery, manually unlock the actuator, it is advisable to move the gate into the fully open position and reset unlocking by turning
the lever clockwise and close the cover, which is to prevent any unwanted movement of the gate (with the actuator unlocked the gate leaf is free
to move, which could cause damage to property or persons). Once the power supply is restored, the electronic board will charge the back-up
battery and the gate will return to normal operation after a command pulse.
CAUTION: Unlock and reset with the gate stationary, do not leave the unlocking compartment without a cover.
Maintenance: Periodically check the fixing screws, the integrity of the connecting cables, the correct functioning of the safety systems (photocells
and sensitive edges), the robustness of the mechanical stops and the soundness of the systems for supporting the gate leaf (hinges or bearings).
Every 2 years it is recommended to replace the batteries in the remote control.
Control device Location
Location of the buttons for controlling the gate (selectors, keypads, buttons, etc.)
Button Not used Controls total opening of the gate Controls partial opening of the gate Controls second channel
output
Button 1
Button 2
Association of the remote control buttons
If the automatic closing function is active (when the gate is stationary and open the flashing light stays
on) the gate closes after the set time. You can disable this function by pressing the button on the remote
control before the gate reaches the fully open position. If the sequential function is active it opens-stops-
closes.
If the gate meets an obstacle on closing, and automatic closing is active, the control unit makes 5
attempts at closing, after which it remains open. In this case it is necessary to remove the obstacle from
its path and control the gate with the transmitter and button so that it closes completely at low speed.
button 1
button 2
C
B
A
12- User Manual (User operation)
Manual unlocking: open the sliding door (A), insert the key, turn it anticlockwise (B) and remove the cover (C).
Turn the unlocking lever 180° anticlockwise.