22 - ENGLISH
6. USING THE THERMOSTAT.
6.1 Operation.
Make the electrical connections and install the appliance .
Select the required function by pressing its associated key; the
parameters will be displayed in blinking mode and they can be
modified with the “–” “+” keys .
Access to the functions to modify the parameters is timed; the
settings are automatically saved at the end of this time or upon
exiting the menu.
If the relay is activated, the symbol is displayed when on heating
and the
symbol when on air conditioning .
6.2 Configuration.
• KEY
+
KEY
CNF
configuration menu selection .
In the
CnF
configuration menu (accessed after ~ 5 seconds and
after entering the password) it is possible to make the following
settings:
• PASSWORD.
This is used to set a 3-digit password (from 000 to 250) that
provides access to the configuration menu .
After selecting the
CnF
menu, press the
key; using the “
–
”
“
+
” keys you enter the password and press the
key .
If the value is the right one you enter the
CnF
menu .
Changing the password.
After selecting the
CnF
menu, proceed as follows:
- press the key
and enter the old password;
- using the key
scroll through all the menus until you return to
password entry;
- using the “
–
” “
+
” keys, enter the new password and wait for the
timed exit from the menu.
The new password has then been saved .
