Vimar 21553, Инструкция по эксплуатации

Страница: 28 / 74

26
Video door entry system
Stair lights control activation (FUNCTION-F1/F2 or AUX SERVICE 1/2).
With this command it is possible to activate the output used for commanding a suitable external relay connected
to one or more lamps to be turned on.
To activate this type of service it is possible to use both the FUNCTION F1/F2 commands (actuators available
directly on the panel and common to all the internal ones) or the AUX 1/2 SERVICE commands (up to a max of
16 independent services) with the support for an external digital relay art. 02022.
The command is activated by touching the appropriate icon that sends the AUX 1 SERVICE command that acti-
vates the corresponding output in the supporting digital relay (factory setting); nothing anyhow prohibits using the
F1/F2 FUNCTION command and the related actuator of the panel (use the terminal '+12V' as positive and 'F1' or
'F2' as negative) to enable an external auxiliary relay (to setup).
For loads supplied at 230 V it is recommended to use relays of 12 Vdc with output 230 Vac 3 A.
The staircase lighting command is always active in both states of operation MONITOR OFF and MONITOR ON
respectively.
Example of installation:
Figure 15 - Staircase lighting with F1/F2 FUNCTION
Figura 16 - Staircase lighting with AUX
1/2 SERVICE
AL - Power Supply Art. 02030
RD - Digital relay Art. 02022
RL - Relay Art. 02021
TE - Video external entrance panel Art. 02003
CP - Lock opening button
SE - Electric lock 12 Vdc
Art. 02037
CP
RL RL
TE
Art. 02021 Art. 02021
SE
B2
B1
EXT+
EXT-
VLED
X
M
PA
CA
M
S+
S-
+12V
-L
SR
F2
F1
M
1 2
TE
15 2 1 C 5 4 3 RC
+
-
15 2 1 C 5 4 3 RC
+
-
Function
F2
Load max
230 V~ 3A Function
F1
Load max
230 V~ 3A
Art. 02030
0 28V 1
PRI
2 B1 B2
Pillar
1
A B C
B1 2 B2
1A
ID2
ID1
ID0
2A 1B 2B
RD
AL
Art. 02022
Contact N.O.
230 V max 3A
Contact N.O.
230 V max 3A
Entrance panel