Vimar 01913, Инструкция по эксплуатации

Страница: 49 / 84

47
13.6.2.4 Deleting the association of the alarm with the telephone numbers where the SMS
message is to be sent
This setting enables deleting the telephone numbers to which the SMS message must be sent�
The procedure requires no response from the chronothermostat 01913�
Send the following SMS message:
<user code>.SMSAT1.NUM.0
where
0
is the number zero�
Example�
If the set user code is the default 1234 and you want to delete the association of the SMS higher
temperature alarm message with all the phone numbers, send the following SMS:
1234.SMSAT1.NUM.0
13.6.2.5 Changing the value of the temperature differential
This function enables changing the value of the temperature differential DTA used for managing the
temperature alarms�
The SMS message to send is the following one:
<user code>.ATEMP.DTA.X,X
where
X.X
represents the value of DTA to enter; the possible values to set must lie in the range
between 0�1°C and 2°C�
Note: No response SMS message is required from the chronothermostat 01913�
Example�
If the set user code is the default 1234 and you want to set the differential value DTA to 0�4°C, send
the following SMS message:
1234.ATEMP.DTA.0,4
13.5.2.6 Customizing the Address Msg.
See paragraph 13�6�1�8 on page 41�