17
The desired temperature values are set using the 22 vertical sliders.
To adjust the temperature in the time period between midnight and
04:00 only two sliders will be used (one slider to set the temperature
between 00:00 and 02:00 and one to set the temperature between
02:00 and 04:00) whereas, for the following hours, each slider will
correspond to a specific hour of the day.
The heating temperature values are the ones on the left of the first
slider on the timer-thermostat (marked with the symbol at the bot-
tom), whereas the air-conditioning ones are shown to the right of the
last slider (marked with the symbol at the bottom).
During
AUTO
operation the display shows the temperature settings
with a diagram in which:
- at the bottom there are the hours of the day (from 0 to 23);
- vertically there are the corresponding temperature values that can
be set with the sliders (the heating values on the left-hand side and
the air-conditioning values on the right-hand side).
The following figure shows the display of the timer-thermostat during
AUTO
operation in heating mode:
The automatic operating mode can be associated with daily or
weekly programming:
- For daily programming, the temperature settings are reproposed
day by day and therefore the programming will be identical for
every day of the week (see par. 9.7.3); these values can be
changed in real time by using the vertical sliders.
- In case of weekly programming, the timer-thermostat saves sepa-
rate temperature settings associated with the corresponding day
of the week and, at the start of each day, activates the correspond-
ing automatic program.
Figure 18
Содержание 01911
