27
9.7.7 °C/°F
This option is used to set the unit of measurement of the temperature
on the timer-thermostat.
Press the
selection button on
°C/°F
and, using the rotary knob,
set the desired unit of measurement (
°C
or
°F
); lastly press the
selection button to confirm.
9.7.8 CONFIG. RF
See chap. 11.
9.7.9 PIN
This option is used to set, edit or deactivate a three-digit code that, if
active, must be entered to be able to access the menus of the timer-
thermostat and make any change to its operation (for example, pass-
ing from
MANUAL
to
OFF
, setting the temperature values, etc.).
Press the
selection button on
PIN
; using the rotary knob, set
the first, second and third digit, pressing the
selection button to
confirm each of the digits selected.
The
PIN
value
000
is equivalent to not setting the code for access-
ing timer-thermostat use.
If the
PIN
code is lost and it is no longer possible to access the
menus of the timer-thermostat, the device must be reset by following
the instructions given in par. 13.1.
9.7.10 INFO
This option is used to display the data related to the firmware and to
the hours of operation of the timer-thermostat.
Press the
selection button on
INFO
; using the rotary knob,
select:
•
FIRMWARE
Press the
; selection button; the display will show the release
of the current firmware.
•
h OPERAT.
Press the
; selection button; using the rotary knob, you can
view:
Содержание 01911
