9/44 NT00000792-KUBAIR-F400-ECOWATT-VENTDRIVE-AN-220314
3.3 Accessories (dimensions in mm)
E
Ø F
Circular flexible sleeve
E
A+3
B+3
Rectangular flexible sleeve
A
B
B
A
C
Standard support for horizontal axis motor:
This support allows to fix the unit onto the floor with the mo
-
tor in horizontal axis position. Reposition, on the 2 corners
of the unit on the side opposite the motor, 2 of the fixings of
the unit and replace the other 2 fixings on the unit by those
supplied with the KUBZ01. These 4 fixings are screwed
onto the unit with 16 self-drilling screws 4.8x12 supplied.
The 2 support arms must be fixed on the 4 unit fixings with
the 4 M8 x 15 screws supplied. The the motor controller
must be removed and then reattached to the motor vertical
side of the engine casing. The fixing holes are designed to
be refixed with its self-drilling screws.
A
B
Connection flange
This connecting flange is fixed to the plain flange with its 4
corners to allow the fixing of a duct with METU framework.
A
A
ØF
Circular connection to the MV suction, horizontal axis
motor
A+3
B+3
H
Ø F
A+3
B+3
H
ØF
ØF
A+3
B+3
H
Rigid straight or errant circular connection
ØA
H
S
G
Fz
B
C
d
ØA
H
S
G
Fz
B
C
d
Vibration isolating devices
4 vibration isolating devices supplied with 4 screws to
attach them to the casing.
MSDZ
MSCZ
KUBZ 01
KUBZ 02
KUBZ 03
KUBZ 04
KUBZ 05