ViM KUBAIR F400 ECOWATT CC, Техническое руководство

Страница: 19 / 44

19/44 NT-50907601-KUBAIR-F400-ECOWATT-AN-191025
Convertisseur USB - RS485
Terminaison 120Ω 1 nF
RX / TX +
RX / TX -
5 6 7 8
Invento 01
5 6 7 8
Invento 02
5 6 7 8
Invento 03
Segment
Dérivation
A1 B1 A2 B2 A1 B1 A2 B2 A1 B1 A2 B2
It is imperative to address a unique address to each controller.
ModBus address :
COMPACTO : Register 7 of Holding Registers.
INVENTO : Register 9 of Holding Registers.
Refer to the corresponding paragraph below for the connection and the setting of your casing.
5.2.5
Default configuration settings
A USB converter with RS 485 is necessary for you to connect to the registers via a PC, as well as an
interface of the same type as ModBus Doctor.
Single-phase model* 3-phase model*
MODBUS address 1 80
Baut rate 19200
START Bit 1
STOP Bit 1
Parity NONE
* For additional information refer to the roof fan controller manual (available on www.vim.fr).
5.2.6 Input register table
The "Input Register" table allows you to read the following information:
Register Fonction Resolution Description
Single-phase model
4 Speed 1 rpm
8 Power 0,1 W
9 An1 input 0,01 V
10 An2 input 0,01 V
11 Pot input 0,01 V
3-phase model
0 Speed 1 rpm
2 Power 1 W
9 An1 input 0,01 V
10 An2 input 0,01 V
For all other information on the setting of Modbus, contact the After-Sales service department.