10/44
NT-50907601-KUBAIR-F400-ECOWATT-AN-191025
B
C
A
325 mm mini
Seal
Squares
Collar straps
Standard support (Sizes 355 ou 400)
This assembly is not adapted for the use an energy-saving
component or an adapter plate. Make sure that the duct can
bear the weight of the casing.
• Set up the 4 squares and the 2 collar straps on the
duct.
• Set up the seal on the free edge of the duct.
• Put the casing on the duct by correctly placing it in
the centre.
• Adjust and assemble the squares on the unit.
• Stretch out the 2 collar straps.
E
G
S
Sealing frame
Embed the frame into the constructed support and make
sure that the fixing lugs are embedded into the concrete.
A mini
70 mm
E
G
M
K
Energy-saving component
Assemble the energy-saving component inside the upstands,
under the casing. It is incompatible with the use of the TCDZ
05 adapter plates and the TCDZ 01 standard support. Make
sure that the components are able to move freely before the
casing is assembled. Provide for a drop in pressure of 50 Pa.
Straight, inclined and acoustic upstand
According to DTU 43.1, it is possible to attach a TCDZ 03
energy-saving component or a TCDZ 05 (excluding TCDZ
09) adapter plate which is placed inside the upstand.
For any casing with an acoustic straight upstand (TCDZ
09), provide for a drop in pressure of 80 Pa.
E
G
150
100
100
α
100
G
N
E
R
E
G
N
800
100
G
E
ØD
T
TCDZ 05: Adapter plate
The adapter plate makes it possible to connect the casing
to a circular duct. This part allows the aeraulic connection
and it is not intended to bear the weight of the casing. It is
incompatible with the use of the TCDZ 03 energy-saving
component and the TCDZ 09 acoustic upstand.
TCDZ 01
TCDZ 02
TCDZ 03
TCDZ 07
TCDZ 04
TCDZ 09
TCDZ 05
