Viking VGDO271, Сервисный журнал, Страница: 12 / 52

GENERAL INFORMATION
Removing Oven Door
To avoid personal injury or property damage, handle
oven door with care.
•
Door is heavy and can be damaged if dropped.
•
Avoid placing hands in hinge area when door is
removed. Hinge can snap closed and pinch hands.
•
Do not scratch or chip glass, or twist door. Glass
may break suddenly.
•
Replace door glass if damaged.
•
Do not lift door by handle.
1. Open door fully.
2. Remove
screws.
•
Oven doors are attached with a screw on each
side of oven door.
3. Close door to first stop, grasp door firmly on each
side, and lift upward until door is off hinges.
•
Do not lift door by handle. Glass or handle can
break.
•
Only push hinges closed once oven door is
removed if necessary. Use both hands when
closing hinge. Hinge snaps closed.
Replacing Oven Light
To avoid risk of burns or electrical shock, disconnect
electrical supply to oven before changing light bulb.
•
Before replacing light bulb make sure bulb and lens
are cool.
•
Wear protective gloves.
•
Do not operate oven without bulb and lens cover in
place.
1. Disconnect electrical supply.
2. Remove oven door if desired.
3. Unscrew light bulb cover (counterclockwise)
located in rear of cavity. Then turn light bulb
counter-clock-wise to remove.
4. Replace light bulb with 120-volt, 40 watt appliance
bulb.
•
Do not over-tighten bulb or cover. They may be
difficult to remove later.
5. Replace light bulb cover and oven door before use.
6. Reconnect power supply.
12