manualshive.com logo in svg

Viking VDSC530T, Руководство по обслуживанию

Поделиться
Скачать
Viking VDSC530T Скачать руководство пользователя страница 65

© 2010 Viking Preferred Service 

65

Service Diagnostics and Procedures 

Control Board Access

The range uses a control board to perform various 
oven functions. As input is received by the board, 
corresponding output actions are performed (relays 
open/close). 

To access Control Board:
1.  

Remove screws and lift kick plate from keyhole 
screws.

2.  

Remove keyhole screws and lower access grill 
from range.

3.  

Remove screws and slide control panel 
assembly from range.

Note:

 During installation, make sure the tabs on the 

control panel are aligned with the slots on the range.

4. 

Reverse procedure for installation.

Control Board Removal

Control Board Accessed
1.  

 Mark and disconnect all connectors from control 
board and capacitors.

2.  

Place control board panel assembly on suitable 
work surface.

3.  

The main control board, power board and 
capacitors are replaced as one assembly.

4.  Reverse procedure for installation.

WARNING

 

To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power 
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure 
correct earth ground and polarization. After servicing, reconnect power using power switch.

Service Diagnostics and Procedures–Disassembly

Screws

Kick Plate

Keyhole Screws

Lower Access Grill

Screws

Tabs

Connectors

Connectors

Capacitors

Connectors

Connectors

Connectors

Содержание VDSC530T











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды