manualshive.com logo in svg

Viking VDSC530T, Руководство по обслуживанию

Поделиться
Скачать
Viking VDSC530T Скачать руководство пользователя страница 27

© 2010 Viking Preferred Service 

27

Operation

Cleaning and Maintenance (cont.)

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT 
TO THE OFF POSITION BEFORE REMOVING. Pull 
the knobs straight off. Wash in detergent and warm 
water. Dry completely and replace by pushing firmly 
on to stem.

Stainless Steel Parts

All stainless steel body parts should be wiped 
regularly with hot soapy water at the end of each 
cooling period and with a liquid cleaner designed 
for that material when soapy water will not do 
the job. 

DO NOT

 use steel wool, abrasive cloths, 

cleansers, or powders. If necessary, scrape stainless 
steel to remove encrusted materials, soak the area 
with hot towels to loosen the material, then use a 
wooden or nylon spatula or scraper.

 DO NOT

 use 

a metal knife, spatula, or any other metal tool to 
scrape stainless steel. 

DO NOT

 permit citrus or 

tomato juice to remain on stainless steel surface, as 
citric acid will permanently discolor stainless steel. 
Wipe up any spills immediately. 

Brass Parts

Broiler Pan and Grid

Clean with detergent and hot water. For stubborn 
spots, use a soap-filled steel wool pad.

Oven Racks

Clean with detergent and hot water. Stubborn spots 
can be scoured with a soap-filled steel wool pad. 

DO NOT

 CLEAN THE OVEN RACKS OR RACK- 

SUPPORT USING THE SELF-CLEAN CYCLE. They 
could sustain damage due to the extreme heat of 
the self-clean cycle.

CAUTION

All special ordered brass parts are coated 
with an epoxy coating. 

DO NOT

 USE BRASS 

CLEANERS OR ABRASIVE CLEANERS ON ANY 
BRASS PARTS. All brass body parts should be 
wiped regularly with hot soapy water. When 
hot soapy water will not do the job, use every 
day household cleaners that are not abrasive.

Содержание VDSC530T











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды