background image

© 2009 Viking Preferred Service 

Warranty Information

4

Professional Series Outdoor Gas Grill Warranty

One Year Full Warranty

Outdoor gas grills and all of their component parts, except as detailed below*, are warranted to be free from 
defective materials or workmanship in normal household use for a period of twelve (12) months from the date of 
original retail purchase.  Viking Range Corporation, warrantor, agrees to repair or replace, at its option, any part 
which fails or is found to be defective during the warranty period.

*Painted and decorative items are warranted to be free from defective materials or workmanship for a period of 
ninety (90) days from the date of original retail purchase.  ANY DEFECTS MUST BE REPORTED TO THE SELLING 
DEALER WITHIN NINETY (90) DAYS FROM DATE OF ORIGINAL RETAIL PURCHASE. Viking Range Corporation 
uses the most up-to-date processes and best materials available to produce all color finishes.  However, slight 
color variation may be noticed because of the inherent differences in painted parts and porcelain parts as well as 
differences in kitchen lighting, product locations, and other factors.

Five Year Limited Warranty

Any burner assemblies, TruSear™ infrared burner, infrared rotisserie burner, or porcelain grill grate which fails due to 
defective materials or workmanship in normal household use during the second through fifth year from the date of 
original retail purchase will be repaired or replaced, free of charge for the part itself, with the owner paying all other 
costs, including labor. Corrosion, scratching, and discoloration due to improper use and care of the outdoor product 
is excluded from this warranty.

Lifetime Limited Warranty

Any stainless steel part or porcelain grill grate which rusts through due to defective materials or workmanship in 
normal household use during the fifth through the useful lifetime of the grill from the date of original retail purchase 
will be repaired or replaced, free of charge for the part itself, with the owner paying all other costs, including labor.

Ninety (90) Day Residential Plus Warranty 

This warranty applies to applications where use of the product extends beyond normal residential use.  Examples 
are, but not limited to, bed and breakfasts, fire stations, private clubs, churches, etc.  This warranty excludes all 
commercial locations such as restaurants, food service locations and institutional food service locations.

This warranty extends to the original purchaser of the product warranted hereunder and to each transferee owner of 
the product during the term of the warranty.

This warranty shall apply to products purchased and located in the United States and Canada. Products must be 
purchased in the country where service is requested. Warranty labor shall be performed by an authorized Viking 
Range Corporation service agency or representative. Warranty shall not apply to damage resulting from abuse, 
accident, natural disaster, loss of electrical power to the product for any reason, alteration, outdoor use, improper 
installation, improper operation, or repair or service of the product by anyone other than an authorized Viking Range 
Corporation service agency or representative. This warranty does not apply to commercial usage. Warrantor is not 
responsible for consequential or incidental damage whether arising out of breach of warranty, breach of contract, or 
otherwise. Some jurisdictions do not allow the exclusion or limitation of incidental of consequential damages, so the 
above limitation or exclusion may not apply to you.

Owner shall be responsible for proper installation, providing normal care and maintenance, providing proof of 
purchase upon request, and making the appliance reasonably accessible for service. If the product or one of its 
component parts contains a defect or malfunction during the warranty period, after a reasonable number of attempts 
by the warrantor to remedy the defects or malfunctions, the owner is entitled to either a refund or replacement of 
the product or its component part or parts. Warrantor’s liability on any claim of any kind, with respect to the goods 
or services covered hereunder, shall in no case exceed the price of the goods or service or part thereof which gives 
rise to the claim.

VIKING RANGE CORPORATION

111 Front Street, Greenwood, Mississippi (MS) 38930 USA 662-455-1200

Specifications are subject to change without notice.

For more product information, call 1-888-VIKING1 (845-4641), or visit our web

site at 

http://www.vikingrange.com

Содержание "T" SERIES































Отзывы: