Symptom
Possible Cause
Corrective Action
Blower motor inoperable.
Open blower motor.
Replace blower motor.
Oven sensor out of calibration.
Replace oven sensor.
Open relay K8 or K9.
Replace oven control board.
Open oven control board.
Replace oven control board.
Defective oven wiring (shorted,
open, or burned).
Repair or replace defective wiring.
LED Error Codes
The LED error codes are displayed on the control panel using the cycle and clean lights. Refer to the chart below to
determine the type of error that is being displayed.
LED Error Codes
Type of error
Cycle Light
Clean Light
Latch
OFF
1 flash
RTD
(Oven Probe)
1 flash
OFF
Model
2 flashes
(The model header failure only occurs at power up of unit.
Install correct header and restart power up.)
ON
Cooling Fan
3 flashes
ON
High Limit
4 flashes
ON
Troubleshooting
©2012 Viking Preferred Service
31
Содержание RDSCE230-5B
Страница 45: ...Wiring Diagrams 2012 Viking Preferred Service 45...
Страница 46: ...Wiring Diagrams 46 2012 Viking Preferred Service...