20
Related Products
Panic Button with User Recorded ID Message
Model
PB-3
is an Emergency Phone Panic Button designed to mount under a desk or
countertop and provide a quick and reliable way to make a silent analog emergency call.
The called party can silently monitor the situation or engage in two-way handsfree
communication by entering a touch tone “#”.
The
PB-3
is designed to connect to any standard analog telephone line, analog phone
system station or FXS port. All programming parameters, including phone numbers and
location numbers, are stored in non-volatile memory. The unit is telephone line powered,
requiring no batteries or external power, and is compatible with common Central Station
Monitoring equipment.
The
PB-3
dials up to 5 emergency numbers, as well as 2 central station numbers, and
can be easily programmed from any touch tone phone. The Panic Button can be
programmed to automatically deliver a digital announcement identifying the location of the
emergency call, and an optional DTMF touch tone code may also be delivered. The red
LED integrated into the push button will light, indicating that an emergency call is in
progress.
For more information, see DOD 239.
Troubleshooting
If the unit cannot register with the programmed SIP server, the Panic Button LED will blink on and off every two seconds,
and three error beeps will be heard every 30 seconds until communication is restored. This alerts a potential user of a
problem with the device that will prevent an emergency phone call from being made.
You may silence the error beeps, per instance, by pressing and holding the Panic Button for 5 seconds (see PC Programming
section B) or by clicking the “Mute Alarm Until Next Failure” button in the Viking IP Programming Software (see Programming
section 37). The error beeps automatically re-enable once the unit is registered, to alert of any new problems that arise.
