• Discreet compact design
• Built-in microphone for silent monitoring
• 2 Amp relay contacts for SL-2 strobe light control, etc.
• SIP compliant (see DOD 944) for list of compatible phone
systems and cloud providers
• Outbound Proxy, Authentication ID, Peer to Peer, VLAN
Tagging
• PoE powered (class 1, <4 Watts)
• Automatic Noise Canceling (ANC) feature for proper operation
in noisy areas
• VoIP eliminates the need for “Push to Talk” mode
• Network downloadable firmware
• Non-volatile digital announcer with 28 seconds of memory
• Handsfree operation
• Dials up to 5 emergency numbers
• Cycles through backup phone numbers on busy or no-answer
• Hangs up on busy signal, time-out or call ended signal
• Extended temperature range (-40°F to 140°F)
• Optional
PB-100
Polling System available (
DOD 232
)
• Optional
SL-2
(
DOD 242
) or
BLK-4-EWP
(
DOD 654
) strobe
light kits available
• Diagnostics
for testing microphone, speaker, and relay
• Also available with analog telecom interface, see model
PB-3
for more information (
DOD 239
)
Power:
PoE class 1 (<4 Watts)
Maximum Sound Pressure:
86 dB SPL @ 1m
Dimensions:
See Installation and Specifications
Operating Temperature:
-40°F to 140°F (-40° C to 60° C)
Humidity:
5% to 95% non-condensing
Audio Codecs:
G711u, G711a, G722
Network Compliance:
IEEE 802.3 af PoE, SIP 2.0 RFC3261,
100BASE-TX with auto cross over
Regulatory Compliance:
CE, FCC Part 15 and Canada
ICES-003 Class A
Connections:
(1) RJ45 10/100 Base-T, (3) gel-filled butt
connectors
!
Features
Applications
Specifications
VoIP Panic Button with User Recorded ID Message
• K-12 classrooms
• College classrooms
• Courtrooms
• Bank tellers
• Silent holdup alarm dialer
• Gas stations
• Motel reception desks
• Convenience stores
• All night restaurants
• Casinos
Model
PB-3-IP
is an VoIP Emergency Phone Panic Button designed to mount under
a desk or countertop and provide a quick and reliable way to make a silent
emergency call. The called party can silently monitor the situation or engage in two-
way handsfree communication by entering a touch tone “#”.
The
PB-3-IP
functions as a SIP end point connecting with a single CAT 5/6 cable
from your POE switch. The unit can be programmed from any PC on the same LAN
or remotely using a static IP address.
The
PB-3-IP
dials up to 5 emergency numbers and can be programmed to
automatically deliver a digital voice announcement and / or an optional DTMF touch
tone code to identify the location of the emergency call. The red LED integrated into
the push button will light, indicating that an emergency call is in progress.
Installation requires the assistance of a Network Administrator / IT Technician.
www.VikingElectronics.com
Information: 715-386-8861
PRODUCT
MANUAL
Designed, Manufactured and Supported in the USA
PB-3-IP
VoIP Emergency Phone
Panic Button
June 17, 2020
SECURITY & COMMUNICATION
VIKING
