10
Programming Features
Index
DESCRIPTION
Section
Page
Connect/Disconnect
B
7
VLAN Settings
D
9
Unit Name
1
11
SIP Server
2
11
Peer to Peer Settings
3
11
Outbound Proxy
4
11
Authentication ID
5
11
Register Fails
6
11
Phone Number Database
7
12
Event Log
8
13
Entry Code Database
9
14
Keyless / Card Logging
10
14
Security code (factory set to 845464)
11
14
Access Code (1 - 6 digits, blank = disabled, factory set to 123456)
12
14
Weigand Direction
13
15
Select Time Zone
14
15
Daylight Savings
15
15
Internal / External Relays (factory set to Internal)
16
15
Relay Mode (Door Strike, Outbound Call, In / Outbound Call, Doorbell, Alarm, factory set to Door Strike)
17
16
Relay Act (Activation) Command (1 or 2 digits, factory set to relay 1
,
relay 1
Q
2
)
NOTE:
Relay Mode must be set to Door Strike
18
16
Relay Act (Activation) Time (0.5 - 99 seconds, factory set to 5 seconds)
19
16
Relay Activation Delay (Disabled or 0.5 - 99 seconds, factory set to Disabled)
20
16
Relay Buzz Volume (1 - 3 or Disabled, factory set to 3)
21
16
Relay Latch Commands (Enabled or Disabled, factory set to Enabled)
NOTE:
Relay Mode must be set to Door Strike
22
17
In-Band Audio Call Progress (Enabled, Disabled, factory set to Enabled)
23
17
In-Band Audio Detect Sensitivity (1 - 9, 1 = minimum, 9 = maximum, factory set to 5, power cycle unit after setting)
24
17
Call Length Time Out (disabled or 1 - 9 minutes, factory set to 3 minutes)
25
17
Talk/Listen Delay (VOX) (0.1 - 0.9 seconds, factory set to 0.5 seconds)
26
17
Speaker Mode (ON, OFF / Silent Monitor or OFF until Answered, factory set to ON)
27
17
Speaker Volume (0 - 9, factory set to 3)
28
17
Microphone Volume (0 - 9, 0 = Auto, factory set to 5)
29
12
Inbound Call Mode (Disabled, Auto Answer, Auto Answer-Secure, Ring, Ring with AGC, Silent Monitor, Silent Monitor Secure, Factory
set to Auto Answer)
30
18
Dial Next Number on RNA (Ring No Answer) (disabled, 1 - 9 = number of rings, factory set to 7)
31
18
Dial Next Number on Busy (disabled or enabled, factory set to enabled)
32
18
In Call Dialing (Enabled, Disabled, factory set to Disabled)
33
18
In Call Dialing Format (Inband DTMF or RFC2833, factory set to RFC2833)
34
18
Mute Current / Next Alarm
35
19
Permanent Alarm Mute
36
19
IP Firmware
37
19
Unit Firmware
38
19
Import/Export
39
19
Clear Phone Settings
40
20
Clear IP Settings
41
20
Diagnostics (used to check mic, speaker, relays and proximity card reader operation)
44
20
REX Input
45
20
