PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
E-60-IP Series
Double Gang Mount
VoIP Entry Phones
October 29, 2015
VIKING
Features
Applications
Specifications
www.vikingelectronics.com
Information: (715) 386-8861
VoIP Entry Phones in 4 Attractive Finishes that
Mount in Standard Double Gang Electrical Boxes
• Compact:
Front panel is the size of a typical double gang mid-size wall plate
• Mounting:
Flush mounts in a double gang electrical box (2.25” deepx 3.65”
wide x 2.84” tall minimum) or surface mounts in a Viking
VE-5x5
(not in-
cluded, see
DOD# 424
) for mounting to a wall, post or
VE-GNP
Gooseneck
Pedestal (EWP recommended)
• Available in 4 standard faceplate finishes:
Brushed Stainless Steel, Oil
Rubbed Bronze, Textured Black and Satin White
• PNL-60 faceplates:
Replacement faceplates with matching screws available
in all four standard finishes
• Self diagnostic reports via email
(testing com, mic, speaker & switch)
• Automatic polling and programming software included
• 2 Amp relay contacts for door/gate or SL-2 strobe light control
• Blue LED indicator
• SIP compliant
(see pg 2 for list of compatible IP-PBX phone systems)
• PoE powered (class 1, <4 watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy
environments
• VoIP eliminates the need for “Push to Talk” mode
• Network downloadable firmware
• Handsfree operation
• 304 stainless steel prevents corrosion on the stainless steel models
• Programmable to dial up to 5 numbers on busy or ring no answer
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP), EWP products are designed
to meet IP66 Ingress Protection Rating, see
DOD# 859
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Extended temperature range (-40°F to 140°F)
• Volume adjustments for microphone and speaker
• Optional
PB-100
Polling System available (
DOD# 232
)
• Optional
SL-2
or
BLK-4-EWP
strobe light kit available (
DOD# 242/653
)
Power:
PoE class 1 (<4 watts)
Dimensions:
Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875” x
4.938” x 0.17”), Phone: 72mm x 46mm x 42mm (2.84” x 1.8” x
1.65”)
Shipping Weight:
0.55 kg (1.2 lbs)
Operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Humidity - Standard Products:
5% to 95% non-condensing
Humidity - EWP Products:
Up to 100%
Audio Codecs:
G711u, G711a, G722
Network Compliance:
IEEE802.3af PoE, SIP 2.0 RFC3261,
100BASE-TX with auto cross over
Connections:
(1) RJ45 10/100 Base-T, (3) gel-filled butt connec-
tors
Installation requires the assistance of a Network Administrator / IT Technician.
!
The
E-60-IP
Series are compact, vandal resistant VoIP Entry Phones designed to
provide quick and reliable handsfree communication for SIP VoIP phone systems
with PoE. The
E-60-IP
Series entry phones can be programmed from any Touch
Tone phone or PC on the same LAN. The entry phones can dial up to 5 program-
mable numbers.
The
E-60-IP
’s compact size allows it to be mounted in a standard double gang
electrical box. The
E-60-IP
is available in four different attractive finishes to match
your door hardware, light fixtures, etc. Replacement
E-60
faceplates (
PNL60
) can
be purchased separately and are available in all four standard finishes. The
E-60-
IP
’s blue LED continually provides light for locating the push button in dark loca-
tions, flashes during dialing and automatically lights again when the call is
answered. All programming parameters, including phone numbers and location
numbers, are stored in non-volatile memory, requiring no batteries. All units are
PoE powered.
For outdoor installations where the unit is exposed to precipitation or condensa-
tion, the
E-60-IP
Series entry phones are available with Enhanced Weather Pro-
tection (
EWP
). EWP products feature foam rubber gaskets and boots, sealed
connections, gel-filled butt connectors, as well as urethane or thermal plastic pot-
ted circuit boards. For more information, see
DOD# 859
.
• Gate Entrance
• Parking ramps/lots
• ATM machines
• Medical centers
• Lobbies
• Entryways
• Stadiums
• Convention centers
• Public access areas
E-60-SS-IP
“Brushed Stainless Steel”
(similar to brushed nickel)
Shown with optional
VE-5x5
surface
mount box &
VE-LIGHT
(not included)
E-60-BN-IP
“Oil Rubbed Bronze”
(satin dark brown powder
paint with fine copper metallic)
E-60-WH-IP
“White”
(satin white powder paint)
E-60-BK-IP
“Black”
(fine texture black powder paint)
