Viking Designer DMOR200SS, Руководство по обслуживанию

Страница: 5 / 37

5
DMOR200SS
PRODUCT DESCRIPTION
GENERAL INFORMATION
OPERATION
TROUBLESHOOTING GUIDE AND
TEST PROCEDURE
COMPONENT REPLACEMENT
AND ADJUSTMENT PROCEDURE
WIRING DIAGRAM
PARTS LIST
SERVICE MANUAL
MICROWAVE OVEN
DMOR200SS
FOREWORD
This Manual has been prepared to provide VIKING Products. Service
Personnel with Operation and Service Information for the VIKING MI-
CROWAVE OVENS.
It is recommended that service personnel carefully study the entire
text of this manual so that they will be qualified to render satisfactory
customer service.
Check the interlock switches and the door seal carefully. Special atten-
tion should be given to avoid electrical shock and microwave radiation
hazard.
WARNING
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is no other visible damage with the oven.
Servicing and repair work must be carried out only by trained service
personnel.
DANGER
Certain initial parts are intentionally not grounded and present
a risk of electrical shock only during servicing. Service person-
nel - Do not contact the following parts while the appliance
is energized;
High Voltage Capacitor, Power Transformer, Magnetron, High
Voltage Rectifier Assembly, High Voltage Harness;
If provided, Vent Hood, Fan assembly, Cooling Fan Motor.
All the parts marked “*” on parts list are used at voltages more
than 250V.
Removal of the outer wrap gives access to voltage above 250V.
All the parts marked “
∆
” on parts list may cause undue microwave
exposure, by themselves, or when they are damaged, loosened
or removed.
VIKING RANGE CORPORATION
PREFERRED SERVICE
Front Street
Greenwood, Mississippi (MS) 38930 USA