14
15
Service & Registration
Final Preparation
• If it is necessary to scrape stainless steel to
remove encrusted materials, soak with hot,
wet cloths to loosen the material, then use
a wood or nylon scraper.
DO NOT
use a metal knife, spatula, or any
other metal tool to scrape stainless steel!
Scratches are almost impossible
to remove.
2. Place an induction compatible piece of
cookware onto the left front burner–Left
front indicator should be solid.
3. Remove cookware and repeat steps for
other elements.
• Some stainless steel parts may have a plas-
tic protective wrap which must be peeled
off.
• All stainless steel body parts should be
wiped with hot, soapy water and with a liq-
uid cleaner designed for this material.
If buildup occurs,
DO NOT
use steel wool,
abrasive cloths, cleaners, or powders!
Performance Checklist
A qualified installer should carry out the fol-
lowing checks:
I
I
Check top surface elements
1. Starting with the left front element, turn
the corresponding knob to the Hi
position–Left front indicator should flash.
Only authorized replacement parts may be used in performing service on the cooktop.
DO NOT
repair or replace any part of the appliance unless specifically recommended in the
manual. All other servicing should be referred to a qualified technician. Contact Viking Range
Corporation, 1-888-VIKING1 (854-4641), for the nearest service parts distributor in your area
or write to:
VIKING RANGE CORPORATION
PREFERRED SERVICE
1803 Hwy 82W
Greenwood, Mississippi 38930 USA
Cooktop –
The serial number and model number for your unit can be found by looking under
the cooktop. Record the following information indicated below. You will need it if service is ever
required.
Model number
____________________________________________________________________________________
Serial number
_____________________________________________________________________________________
Date of purchase
__________________________________________________________________________________
Date installed
______________________________________________________________________________________
Dealer’s name
_____________________________________________________________________________________
Address
___________________________________________________________________________________________
These installation instructions should remain with the unit for future reference.
