![background image](http://html1.mh-extra.com/html/viking-range/ddsb423/ddsb423_installation-instructions-manual_1026353027.webp)
27
1. Remove cabinet side trim with a phillips
screwdriver.
2. Remove handle-side door trim with a phillips
screwdriver.
3. Install “Z” brackets (see page 25 for details).
4. Align panel in door trim and push evenly. For
smoother installation, apply liquid soap to door
trim and “Z” brackets.
5. Install handle-side door trim with screws. Install
door trim inserts (supplied) on top and both sides
of door by starting in one corner and pushing the
strip in place.
6. Install cabinet trim.
ICE AND WATER DISPENSER BEZEL REMOVAL AND INSTALLATION
FULL OVERLAY MODELS
To Remove:
1. Remove packaging material surrounding bezel.
2. Grasping the sliding lever, pull away from bezel.
3. Remove spill tray from lower part of bezel exposing two screws.
4. Remove screws 1 & 2.
5. Locate two additional screws underneath top section of bezel.
6. Remove screws 3 & 4 and upper mounting support.
7. Grasping the bezel on both sides, pull away from the door cavity.
N
NO
OT
TE
E:: Bezel needs to be pulled slightly downward to clear water dispensing tube.
8. Store bezel and spill shelf in safe and secure place until installation.
Sliding Lever
Screw 4
Screw 2
Screw 1
Screw 3
Spill Tray
Upper
Mounting
Support
T
o Install:
1. Install custom wood panels per product’s
installation instructions.
2. Locate opening cavity on door and position bezel
in opening. N
NO
OT
TE
E:: Graphics on bezel will be on
top end, tilt slightly forward to allow water tube
clearance.
3. Push bezel firmly into cavity until lower screw
holes align with mounting holes on cavity.
4. Install screws 1 & 2 but do not tighten all the way.
5. Locate mounting holes underneath top section of
the bezel.
6. Position upper mounting support over holes
underneath top section of bezel.
7. Install screws 3 & 4 but do not tighten all the way.
8. Adjust and reposition bezel as necessary.
9. Tighten all screws securely and replace spill shelf
in lower part of bezel.
10. Align cube switch with sliding lever and firmly
push until sliding lever is flush with bezel.
DOOR PANE INSTALLATION
FULL OVERLAY MODELS
HANDLE SCREW
INSERT (NOTE:
MOUNTING SCREWS
LOCATED BEHIND
DOOR TRIM INSERT
(MOUNTING
SCREWS LOCATED
BEHIND)
1/4” (0.6 cm)
BASE PANEL
3/4” (1.9 cm)
OVERLAY PANEL
3/4” (1.9 cm) OVERLAY PANEL
1/4” (0.6 cm) BASE PANEL
F
FR
RE
EE
EZ
ZE
ER
R D
DO
OO
OR
R
R
RE
EF
FR
RIIG
GE
ER
RA
AT
TO
OR
R
D
DO
OO
OR
R