Viglen Vig565s, Руководство пользователя

Страница: 22 / 86

Vig565s Motherboard Manual
21
Motherboard Jumper Settings
Figure 4: Motherboard Jumper Settings
Table 3: Clear CMOS Jumper Settings (CLRTC1)
Function Jumper Configuration
Default 1-2 The BIOS uses current configuration information and passwords for
booting.
Clear
CMOS 2-3 Turn off the system and unplug the power cord. Move the jumper from
pins 1-2 (default) to pins 2-3 for about 5~10 seconds. Then move the
jumper back to pins 1-2.
Note: Except when clearing the rtc ram, never remove the jumper on CLRTC1
default position. Removing the jumper will cause system boot failures.
Table 4: BIOS Write Protection
Function
Jumper (
JP3) Configuration
Write Protect
Enabled
(default) 2-3 Protects the BIOS from being written to.
Write Protect
Disabled 1-2 Turn off the system and unplug the power cord. Move the jumper
from pins 1-2 (default) to ins 2-3. Reboot the system.